Uwell Nunchaku mod
Here came one very entertaining instance to me. This is far from a novelty, however, I have had a keen interest in him since his first appearance. And the fact that he took the first prize in the nomination of the pipe mode of 2018 according to the Ecigclick portal version only warmed up my interest. Much has already been said about him, therefore, for a long time I will not detain you.
Dimensions: 94.5 x 27.5mm
Weight: 120g
Case material: stainless steel
Power supply: 1 x 18650
Output power: 5 – 80W
Voltage range: 0.7 – 7.0V
Operating mode: POWER, TC (NI200, SS), BYPASS
Temperature range : 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃
Supported resistance: 0.1 – 3.0Ω / TC 0.1 – 1.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharging / overdischarge
Connector type: steel 510, gold-plated pin, spring loaded
Screen / diagonal: yes
Micro-USB port / charging: yes, charging current 1A
Color: see photo below
Options
– Nunchaku Mod mod
– USB cable
– user manual
– warranty card
The experience of communicating with instances of a similar segment or form factor, if you like, is not so big. Therefore, picking it up for the first time, I was pleasantly surprised – cool, unusual, convenient – not a brick, not a triangular ryx-like box, but a simple pipe. By the way, I abandoned the mechanical pipe mod already a long time ago, which is probably why this meeting caused such emotions.
The mod is a bit tall, but the developers had to hide all the functionality somewhere. It lies perfectly in the hand – you can operate with at least the index, at least with your thumb. The decor, as such, is completely absent – a business or a strict bow. The whole load in this regard was assumed by the form – pot-bellied in the center and fitted to the top. It looks great, as for me, much more interesting than the same direct post from Ehpro. Although this is natural, it is a subjective view.
The landing site will accept atoms up to 25mm in diameter, inclusive. There is a relief engraving as a “protection” from the attachment of an atom, however, the varnish will naturally suffer over time. Well, this is a standard and not particularly critical outcome.
I’m a little incomprehensible choice of developers in this regard, it is likely this is a design feature. Admittedly, the standard 24mm looks pretty decent on it.
The control panel focused on the front side. There is a small, but quite convenient, plastic fire button, its colleagues – control keys – sank to the bottom. All buttons rattle a little in their grooves, but due to their plasticity this is almost inaudible. The display is very tiny – this is a feature of the pipe mode.
The brightness is average, the information is articulate, although small. You can’t blame it for sure, however, all vital indicators are presented. Using all this decoration is comforta
Were came one very entertaining instance to me. This is far from a novelty, however, I have had a keen interest in him since his first appearance. And the fact that he took the first prize in the nomination of the pipe mode of 2018 according to the Ecigclick portal version only warmed up my interest. Much has already been said about him, therefore, for a long time I will not detain you.
Dimensions: 94.5 x 27.5mm
Weight: 120g
Case material: stainless steel
Power supply: 1 x 18650
Output power: 5 – 80W
Voltage range: 0.7 – 7.0V
Operating mode: POWER, TC (NI200, SS), BYPASS
Temperature range : 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃
Supported resistance: 0.1 – 3.0Ω / TC 0.1 – 1.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharging / overdischarge
Connector type: steel 510, gold-plated pin, spring loaded
Screen / diagonal: yes
Micro-USB port / charging: yes, charging current 1A
Color: see photo below
Options
– Nunchaku Mod mod
– USB cable
– user manual
– warranty card
The experience of communicating with instances of a similar segment or form factor, if you like, is not so big. Therefore, picking it up for the first time, I was pleasantly surprised – cool, unusual, convenient – not a brick, not a triangular ryx-like box, but a simple pipe. By the way, I abandoned the mechanical pipe mod already a long time ago, which is probably why this meeting caused such emotions.
The mod is a bit tall, but the developers had to hide all the functionality somewhere. It lies perfectly in the hand – you can operate with at least the index, at least with your thumb. The decor, as such, is completely absent – a business or a strict bow. The whole load in this regard was assumed by the form – pot-bellied in the center and fitted to the top. It looks great, as for me, much more interesting than the same direct post from Ehpro. Although this is natural, it is a subjective view.
The landing site will accept atoms up to 25mm in diameter, inclusive. There is a relief engraving as a “protection” from the attachment of an atom, however, the varnish will naturally suffer over time. Well, this is a standard and not particularly critical outcome.
I’m a little incomprehensible choice of developers in this regard, it is likely this is a design feature. Admittedly, the standard 24mm looks pretty decent on it.
The control panel focused on the front side. There is a small, but quite convenient, plastic fire button, its colleagues – control keys – sank to the bottom. All buttons rattle a little in their grooves, but due to their plasticity this is almost inaudible. The display is very tiny – this is a feature of the pipe mode.
The brightness is average, the information is articulate, although small. You can’t blame it for sure, however, all vital indicators are presented. Using all this decoration is comforta
